Resultados: 80
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Tipo de producto
Producto
Frecuencia
Banda de frecuencias
Régimen de voltaje
Impedancia
Estilo de terminación
Temperatura de trabajo mínima
Temperatura de trabajo máxima
Marki Microwave Acondicionamiento de señales The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
Hoja de datos
3En existencias
Min.: 1
Mult.: 1
No
Signal Conditioning Mixer 10 MHz to 20 GHz 10 MHz to 20 GHz Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm.
Hoja de datos
22En existencias
Min.: 1
Mult.: 1

Signal Conditioning DC to 40 GHz DC to 40 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
Hoja de datos
5Se espera el 13/03/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixer 5 MHz to 26.5 GHz 5 MHz to 26.5 GHz 50 Ohms Connector - 55 C + 85 C
Marki Microwave Acondicionamiento de señales The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
Hoja de datos
3Se espera el 13/03/2026
Min.: 1
Mult.: 1

Signal Conditioning 5.25 GHz to 14 GHz, 21 GHz to 56 GHz 5.25 GHz to 14 GHz, 21 GHz to 56 GHz - 40 C + 50 C
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Hoja de datos
5Se espera el 13/03/2026
Min.: 1
Mult.: 1

Signal Conditioning Balun 200 kHz to 3 GHz 200 kHz to 3 GHz 50 Ohms Connector
Marki Microwave Acondicionamiento de señales The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
Hoja de datos
2Se espera el 10/04/2026
Min.: 1
Mult.: 1

Signal Conditioning Balun 300 kHz to 36 GHz 300 kHz to 36 GHz
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
Hoja de datos
25Se espera el 10/04/2026
Min.: 1
Mult.: 1

Signal Conditioning Balun 500 kHz to 9 GHz 500 kHz to 9 GHz SMD/SMT
Marki Microwave Acondicionamiento de señales The BT-0035SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 35 GHz bandwidth.
Hoja de datos
10Se espera el 20/03/2026
Min.: 1
Mult.: 1

Signal Conditioning 10 MHz to 20 GHz 10 MHz to 20 GHz 30 V SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 26 GHz bandwidth.
Hoja de datos
10Se espera el 10/04/2026
Min.: 1
Mult.: 1

Signal Conditioning 500 kHz to 26 GHz 500 kHz to 26 GHz 30 V SMD/SMT + 100 C
Marki Microwave Acondicionamiento de señales A high power type N-connectorized bidirectional coupler capable of operation to 18 GHz. This coupler features a unique air-line construction that simultaneously enables extremely low loss and high directivity.
Hoja de datos
5Se espera el 13/03/2026
Min.: 1
Mult.: 1

Signal Conditioning Coupler 50 Ohms Connector - 40 C + 100 C
Marki Microwave Acondicionamiento de señales The HLM-20PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-20GHz bandwidth. It offers low insertion loss and excellent return loss from DC through K band and has a typical 1 dB compression point of 15 dBm.
Hoja de datos
100Se espera el 10/04/2026
Min.: 1
Mult.: 1

Signal Conditioning DC to 20 GHz DC to 20 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of +11 dBm.
Hoja de datos
100Se espera el 10/04/2026
Min.: 1
Mult.: 1
Signal Conditioning DC to 40 GHz DC to 40 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.
Hoja de datos
3Se espera el 8/05/2026
Min.: 1
Mult.: 1

Signal Conditioning DC to 30 GHz DC to 30 GHz Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
Hoja de datos
25Se espera el 6/03/2026
Min.: 1
Mult.: 1

Signal Conditioning Balun 2 GHz to 50 GHz 2 GHz to 50 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design.
Hoja de datos
25Se espera el 21/08/2026
Min.: 1
Mult.: 1

Signal Conditioning Balun 100 MHz to 6 GHz 100 MHz to 6 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system design.
Hoja de datos
25Se espera el 10/04/2026
Min.: 1
Mult.: 1

Signal Conditioning Balun 500 MHz to 20 GHz 500 MHz to 20 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band.
Hoja de datos
5Se espera el 13/03/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixer DC to 3 GHz, 2 GHz to 12 GHz DC to 3 GHz, 2 GHz to 12 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales MM1-0222L is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth. The MM1 0222L works well as both an up and down converter through the Ku band and beyond.
Hoja de datos
10Se espera el 10/04/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixer DC to 3.5 GHz, 2 GHz to 22 GHz DC to 3.5 GHz, 2 GHz to 22 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MM1-0626H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Hoja de datos
10Se espera el 8/05/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixer DC to 9 GHz, 6 GHz to 26.5 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter.
Hoja de datos
5Se espera el 13/03/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixer DC to 12 GHz, 8 GHz to 32 GHz DC to 12 GHz, 8 GHz to 32 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MPD2-00001PSM is a small footprint MMIC 0.4-4 GHz 2-Way Wilkinson power divider/power splitter featuring high 16 dB isolation and low 0.9 dB insertion loss in our compact DFN package.
Hoja de datos
100Se espera el 13/03/2026
Min.: 1
Mult.: 1

Signal Conditioning Power Divider / Power Splitter SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Hoja de datos
5Se espera el 13/03/2026
Min.: 1
Mult.: 1

Signal Conditioning Power Divider / Power Splitter 50 Ohms Connector
Marki Microwave Acondicionamiento de señales The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
Hoja de datos
5Se espera el 13/03/2026
Min.: 1
Mult.: 1
No
Signal Conditioning Mixer 1 MHz to 7 GHz, 1 MHz to 4 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
Hoja de datos
4Se espera el 13/03/2026
Min.: 1
Mult.: 1
No
Signal Conditioning Mixer 10 GHz to 40 GHz Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The BTM-0026PSM-2 is a packaged miniature bias tee featuring excellent 0.4 dB insertion loss and superior 25 dB isolations over a broad 10 MHz to 26 GHz bandwidth. The BTM-0026PSM-2 works well for K-Band applications.
Hoja de datos
25Se espera el 10/04/2026
Min.: 1
Mult.: 1

Signal Conditioning 10 MHz to 26 GHz 10 MHz to 26 GHz 16 V SMD/SMT - 55 C + 100 dB