|
|
Accesorios SparkFun This 0.012" Flexinol Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it and are made specifically for linear actuators to
- COM-12096
- SparkFun
-
1:
$4.33
-
181En existencias
|
N.º de artículo de Mouser
474-COM-12096
|
SparkFun
|
Accesorios SparkFun This 0.012" Flexinol Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it and are made specifically for linear actuators to
|
|
181En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w
- COM-13104
- SparkFun
-
1:
$13.13
-
15En existencias
|
N.º de artículo de Mouser
474-COM-13104
|
SparkFun
|
Accesorios SparkFun So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w
|
|
15En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type.
- GPS-00579
- SparkFun
-
1:
$2.25
-
17En existencias
|
N.º de artículo de Mouser
474-GPS-00579
|
SparkFun
|
Accesorios SparkFun Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type.
|
|
17En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun 2x5 Pin Shrouded Header
- PRT-08506
- SparkFun
-
1:
$2.04
-
69En existencias
|
N.º de artículo de Mouser
474-PRT-08506
|
SparkFun
|
Accesorios SparkFun 2x5 Pin Shrouded Header
|
|
69En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Heat Sink Compound
- PRT-09599
- SparkFun
-
1:
$2.81
-
126En existencias
|
N.º de artículo de Mouser
474-PRT-09599
|
SparkFun
|
Accesorios SparkFun Heat Sink Compound
|
|
126En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun 2x3 Pin Shrouded Header
- PRT-10877
- SparkFun
-
1:
$1.80
-
31En existencias
|
N.º de artículo de Mouser
474-PRT-10877
|
SparkFun
|
Accesorios SparkFun 2x3 Pin Shrouded Header
|
|
31En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Stackable Header 2x23 Pin Female
- PRT-12790
- SparkFun
-
1:
$3.30
-
155En existencias
|
N.º de artículo de Mouser
474-PRT-12790
|
SparkFun
|
Accesorios SparkFun Stackable Header 2x23 Pin Female
|
|
155En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
- PRT-12807
- SparkFun
-
1:
$0.80
-
50En existencias
|
N.º de artículo de Mouser
474-PRT-12807
|
SparkFun
|
Accesorios SparkFun This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
|
|
50En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
- PRT-15187
- SparkFun
-
1:
$2.85
-
54En existencias
|
N.º de artículo de Mouser
474-PRT-15187
|
SparkFun
|
Accesorios SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
|
|
54En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Soldering Iron Stand
- TOL-09477
- SparkFun
-
1:
$7.75
-
4En existencias
|
N.º de artículo de Mouser
474-TOL-09477
|
SparkFun
|
Accesorios SparkFun Soldering Iron Stand
|
|
4En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
- WRL-00145
- SparkFun
-
1:
$14.95
-
3En existencias
|
N.º de artículo de Mouser
474-WRL-00145
|
SparkFun
|
Accesorios SparkFun 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
|
|
3En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
- WRL-00558
- SparkFun
-
1:
$18.50
-
6En existencias
|
N.º de artículo de Mouser
474-WRL-00558
|
SparkFun
|
Accesorios SparkFun Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
|
|
6En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
- WRL-09143
- SparkFun
-
1:
$11.77
-
77En existencias
|
N.º de artículo de Mouser
474-WRL-09143
|
SparkFun
|
Accesorios SparkFun 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
|
|
77En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
- WRL-09145
- SparkFun
-
1:
$5.75
-
93En existencias
|
N.º de artículo de Mouser
474-WRL-09145
|
SparkFun
|
Accesorios SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
|
|
93En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
- WRL-15114
- SparkFun
-
1:
$2.75
-
36En existencias
|
N.º de artículo de Mouser
474-WRL-15114
|
SparkFun
|
Accesorios SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
|
|
36En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun USB Mini-B Cable 6"
- CAB-13243
- SparkFun
-
1:
$2.86
-
270En existencias
|
N.º de artículo de Mouser
474-CAB-13243
|
SparkFun
|
Accesorios SparkFun USB Mini-B Cable 6"
|
|
270En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
- CAB-16905
- SparkFun
-
1:
$6.50
-
258En existencias
|
N.º de artículo de Mouser
474-CAB-16905
|
SparkFun
|
Accesorios SparkFun This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
|
|
258En existencias
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Sombreros/placas complementarias Raspberry Pi Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board but that's ok because you will want to pre
- DEV-16301
- SparkFun
-
1:
$49.95
-
84En existencias
|
N.º de artículo de Mouser
474-DEV-16301
|
SparkFun
|
Sombreros/placas complementarias Raspberry Pi Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board but that's ok because you will want to pre
|
|
84En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Kits educativos We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
- PRT-09353
- SparkFun
-
1:
$10.95
-
24En existencias
|
N.º de artículo de Mouser
474-PRT-09353
|
SparkFun
|
Kits educativos We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
|
|
24En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Terminales Quick Disconnects- Female 1/4 Pk of 5
- PRT-14407
- SparkFun
-
1:
$0.60
-
348En existencias
|
N.º de artículo de Mouser
474-PRT-14407
|
SparkFun
|
Terminales Quick Disconnects- Female 1/4 Pk of 5
|
|
348En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Alojamientos de cables y cabecera This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
- PRT-16581
- SparkFun
-
1:
$2.83
-
87En existencias
|
N.º de artículo de Mouser
474-PRT-16581
|
SparkFun
|
Alojamientos de cables y cabecera This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
|
|
87En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Gabinetes para informática de una sola placa The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
- PRT-17868
- SparkFun
-
1:
$6.04
-
8En existencias
|
N.º de artículo de Mouser
474-PRT-17868
|
SparkFun
|
Gabinetes para informática de una sola placa The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
|
|
8En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Herramientas de desarrollo WiFi - 802.11 SparkFun ESP8266 Thing Dev Board
- WRL-13804
- SparkFun
-
1:
$20.25
-
4En existencias
|
N.º de artículo de Mouser
474-WRL-13804
|
SparkFun
|
Herramientas de desarrollo WiFi - 802.11 SparkFun ESP8266 Thing Dev Board
|
|
4En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Herramientas de desarrollo de antenas This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro
- WRL-17389
- SparkFun
-
1:
$16.88
-
5En existencias
|
N.º de artículo de Mouser
474-WRL-17389
|
SparkFun
|
Herramientas de desarrollo de antenas This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro
|
|
5En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Etiquetas y Transpondedores NFC/RFID This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-11319
- SparkFun
-
1:
$5.69
-
6En existencias
|
N.º de artículo de Mouser
474-SEN-11319
|
SparkFun
|
Etiquetas y Transpondedores NFC/RFID This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
6En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
