|
|
Accesorios SparkFun So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w
- COM-13104
- SparkFun
-
1:
$13.13
-
16En existencias
|
N.º de artículo de Mouser
474-COM-13104
|
SparkFun
|
Accesorios SparkFun So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w
|
|
16En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type.
- GPS-00579
- SparkFun
-
1:
$2.25
-
17En existencias
|
N.º de artículo de Mouser
474-GPS-00579
|
SparkFun
|
Accesorios SparkFun Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type.
|
|
17En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun 2x5 Pin Shrouded Header
- PRT-08506
- SparkFun
-
1:
$2.04
-
69En existencias
|
N.º de artículo de Mouser
474-PRT-08506
|
SparkFun
|
Accesorios SparkFun 2x5 Pin Shrouded Header
|
|
69En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Heat Sink Compound
- PRT-09599
- SparkFun
-
1:
$2.75
-
144En existencias
|
N.º de artículo de Mouser
474-PRT-09599
|
SparkFun
|
Accesorios SparkFun Heat Sink Compound
|
|
144En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun 2x3 Pin Shrouded Header
- PRT-10877
- SparkFun
-
1:
$1.80
-
31En existencias
|
N.º de artículo de Mouser
474-PRT-10877
|
SparkFun
|
Accesorios SparkFun 2x3 Pin Shrouded Header
|
|
31En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room no
- PRT-12044
- SparkFun
-
1:
$4.50
-
23En existencias
|
N.º de artículo de Mouser
474-PRT-12044
|
SparkFun
|
Accesorios SparkFun This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room no
|
|
23En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Stackable Header 2x23 Pin Female
- PRT-12790
- SparkFun
-
1:
$3.30
-
167En existencias
|
N.º de artículo de Mouser
474-PRT-12790
|
SparkFun
|
Accesorios SparkFun Stackable Header 2x23 Pin Female
|
|
167En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
- PRT-12807
- SparkFun
-
1:
$0.80
-
50En existencias
|
N.º de artículo de Mouser
474-PRT-12807
|
SparkFun
|
Accesorios SparkFun This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
|
|
50En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
- PRT-15187
- SparkFun
-
1:
$2.85
-
59En existencias
|
N.º de artículo de Mouser
474-PRT-15187
|
SparkFun
|
Accesorios SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
|
|
59En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Soldering Iron Stand
- TOL-09477
- SparkFun
-
1:
$7.75
-
3En existencias
|
N.º de artículo de Mouser
474-TOL-09477
|
SparkFun
|
Accesorios SparkFun Soldering Iron Stand
|
|
3En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
- WRL-00145
- SparkFun
-
1:
$14.95
-
3En existencias
|
N.º de artículo de Mouser
474-WRL-00145
|
SparkFun
|
Accesorios SparkFun 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
|
|
3En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
- WRL-00558
- SparkFun
-
1:
$18.50
-
6En existencias
|
N.º de artículo de Mouser
474-WRL-00558
|
SparkFun
|
Accesorios SparkFun Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
|
|
6En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
- WRL-09143
- SparkFun
-
1:
$9.95
-
77En existencias
|
N.º de artículo de Mouser
474-WRL-09143
|
SparkFun
|
Accesorios SparkFun 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
|
|
77En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
- WRL-09145
- SparkFun
-
1:
$5.75
-
93En existencias
|
N.º de artículo de Mouser
474-WRL-09145
|
SparkFun
|
Accesorios SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
|
|
93En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Accesorios SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
- WRL-15114
- SparkFun
-
1:
$2.75
-
76En existencias
|
N.º de artículo de Mouser
474-WRL-15114
|
SparkFun
|
Accesorios SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
|
|
76En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Herramientas de desarrollo del sensor óptico A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b
- BOB-09322
- SparkFun
-
1:
$1.82
-
427En existencias
|
N.º de artículo de Mouser
474-BOB-09322
|
SparkFun
|
Herramientas de desarrollo del sensor óptico A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b
|
|
427En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Herramientas de desarrollo de interfaz FTDI Basic Breakout - 5V
- DEV-09716
- SparkFun
-
1:
$17.71
-
87En existencias
|
N.º de artículo de Mouser
474-DEV-09716
|
SparkFun
|
Herramientas de desarrollo de interfaz FTDI Basic Breakout - 5V
|
|
87En existencias
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Kits educativos We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
- PRT-09353
- SparkFun
-
1:
$10.95
-
25En existencias
|
N.º de artículo de Mouser
474-PRT-09353
|
SparkFun
|
Kits educativos We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
|
|
25En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Etiquetas y Transpondedores NFC/RFID This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-11319
- SparkFun
-
1:
$5.69
-
6En existencias
|
N.º de artículo de Mouser
474-SEN-11319
|
SparkFun
|
Etiquetas y Transpondedores NFC/RFID This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
6En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Alojamientos de cables y cabecera This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
- PRT-16581
- SparkFun
-
1:
$2.83
-
87En existencias
|
N.º de artículo de Mouser
474-PRT-16581
|
SparkFun
|
Alojamientos de cables y cabecera This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
|
|
87En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Gabinetes para informática de una sola placa The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
- PRT-17868
- SparkFun
-
1:
$6.04
-
8En existencias
|
N.º de artículo de Mouser
474-PRT-17868
|
SparkFun
|
Gabinetes para informática de una sola placa The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
|
|
8En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Herramientas de desarrollo WiFi - 802.11 SparkFun ESP8266 Thing Dev Board
- WRL-13804
- SparkFun
-
1:
$20.25
-
4En existencias
|
N.º de artículo de Mouser
474-WRL-13804
|
SparkFun
|
Herramientas de desarrollo WiFi - 802.11 SparkFun ESP8266 Thing Dev Board
|
|
4En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Herramientas de desarrollo de antenas This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro
- WRL-17389
- SparkFun
-
1:
$16.88
-
6En existencias
|
N.º de artículo de Mouser
474-WRL-17389
|
SparkFun
|
Herramientas de desarrollo de antenas This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro
|
|
6En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Herramientas de desarrollo NFC/RFID RFID Tag (125kHz)
- COM-14325
- SparkFun
-
1:
$2.75
-
84En existencias
|
N.º de artículo de Mouser
474-COM-14325
|
SparkFun
|
Herramientas de desarrollo NFC/RFID RFID Tag (125kHz)
|
|
84En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Gabinetes para informática de una sola placa This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
- PRT-17867
- SparkFun
-
1:
$7.33
-
5En existencias
|
N.º de artículo de Mouser
474-PRT-17867
|
SparkFun
|
Gabinetes para informática de una sola placa This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
|
|
5En existencias
|
|
Min.: 1
Mult.: 1
|
|
|
